Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
137
137
4.10.3.5 Mode selection
With the function "Mode selection" the HVAC mode can be toggled in heating actuators or
temperature controllers.
The following figure shows the available settings:
Figure 77: Settings - Mode selection
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Switching values
▪
Comfort /Standby
▪
Comfort/Night
▪
Comfort/Standby/ Night
▪
Comfort/Standby/
Night/Frost
Setting between which operating
modes can be toggled.
Push Button long
▪
inactive
▪
active
Activates an action for the long
keystroke
Left button: Action at
long push of button
▪
Comfort
▪
Standby
▪
Night
▪
Frost
Setting which operating mode
should be called with a long
keystroke to the left button
Right button: Action at
long push of button
▪
Comfort
▪
Standby
▪
Night
▪
Frost
Setting which operating mode
should be called with a long
keystroke to the right button
Switching type
▪
Limit stop
▪
Overrun
Setting what should happen when
the last switching value is reached
Switchover considers status
object
▪
Yes
▪
No
Setting whether the changeover
should send the next switching value
according to the current status
Status object
▪
No Status
▪
HVAC-Mode
▪
HVAC-Status
Defining whether and how the status
is displayed
Table 136: Settings - Mode selection
