MDT Technologies BE-BZS86.01 Technical Manual Download Page 117

Page: 117 / 164

Technical Manual

–

Central Operation Unit Smart

MDT technologies GmbH •

51766 Engelskirchen • Papiermühle 1

Phone: +49-2263-

880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de

117

The following table shows all available settings:
ETS-Text

Dynamic range

[Default value]

Comment

Switching times in the
device

▪

will be transmitted

▪

remain unchanged

Setting whether the parameter
block for the switching times is
transmitted:

will be transmitted

: The

parameter block will be
transmitted depending on the
parameter "Setting for time
switch".

remain unchanged

: The

memory block for the switching
times is not written by the ETS
and the parameter "Settings for
time switch" is hidden

Settings for time switch

▪

fix over application (cannot
be changed on the device)

▪

manual input and
application (application
overwrites all switching
times)

▪

manual input and database
(Transmission aborted if
switching times are
changed on the device)

fix over application

: The

switching times can only be set
in the database and cannot be
changed in the device.

manual input and application
(application overwrites all
switching times):

The switching

times can be set in database
and device. With each
transmission, the complete
values are written from the
database to the device.

manual input and database
(Transmission aborted if
switching times are changed
on the device)

: Before

transmission, the ETS makes a
comparison between the
switching times set in the
database and those in the
device. If these are not equal,
the download is aborted..

Summary of Contents for BE-BZS86.01





































































































































































Search results

Summary of Contents for BE-BZS86.01

Reviews:

Related manuals for BE-BZS86.01

Brands by name

Popular brands

MDT Technologies BE-BZS86.01, Technical Manual

Search results

Summary of Contents for BE-BZS86.01

Reviews:

Related manuals for BE-BZS86.01

Brands by name

Popular brands