Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
95
95
Send value
Single-button function
The function "Send values" - "send value" can send a fixed value according to the set datapoint type.
The following figure shows the available settings:
Figure 53: Settings "Send values" - Send value
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Datapoint type
▪
DPT 2.001 Switch control
▪
DPT 5.001 Percent
▪
DPT 5.005 Decimal factor
▪
DPT 17.001 Scene number
▪
DPT 7.600 Colour
temperature (Kelvin)
▪
DPT 9.001 Temperature
▪
DPT 9.004 Brightness
▪
DPT 232.600 RGB value
Sets the data point type to be
sent
Table 89: Settings "Send values" - Send value
The value to be sent can be set according to the datapoint type.
The following table shows the available communication objects:
Number
Name
Length
Usage
100
Direct button 1
–
switch
control, percent value…
Sending the switching value; DPT depending on
the parameter setting
103
Direct button 1
–
State for display
Receiving the status; DPT depending on the
parameter setting
Table 90: Communication objects - "Send values" - Send value
