Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
80
80
4.8.5.3 Heating/Cooling switchover
Two-button function
The heating/cooling switchover is only available if the controller is set to heating and cooling and the
switchover is to be made via object. The button function can then act directly on the controller.
Figure 38: Setting - Heating/Cooling switchover
Presentation:
Single-button function
Any symbol can be selected for heating and cooling. In addition, the function can be labelled or the
function name can be adapted dynamically in relation to the current value.
Figure 39: Setting - Presentation of Heating/Cooling switchover
