Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
153
153
4.11 Status LED
4.11.1 LED Basic Setting
The LED basic settings affect all active status LEDs. The following figure shows the available settings:
Figure 88: Basic settings - Status LEDs
The table below shows all available settings:
ETS-Text
Dynamic range
[Default value]
Comment
LED-color at button activation,
only by setting “Object and
button activation”
Any color
Parameter is only used at
double assignment: "Keystroke
+ internal / external object"
Behavior of LEDs in Standby
▪
Off
▪
Orientation LEDs
▪
Status-LEDs
Setting how to use the LEDs in
Standby mode
Lock object for LEDs
▪
Off
▪
On
Activates a lock object which
can disable (= switch off) all
LEDs
Behaviour of LEDs at bus power
up
▪
no read LED objects
▪
read LED objects
Setting whether to actively
request the objects after a
reset; only active at "LED reacts
to external object"
Synchronisation object for
flashing LEDs
▪
not active
▪
active as Master
▪
active as Slave
Activation of a synchronization
object for the LEDs
Controlling the LEDs of the
direct buttons separately
▪
inactive
▪
active
Setting whether the display
behaviour for the direct
buttons level should be
different from that for the
other function levels
Table 149: Basic settings - Status LEDs
