Technical Manual
–
Central Operation Unit Smart
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
87
87
Switch with the two-button function
Two-button function
In the case of the two-button function, the respective value (On/Off) can be assigned to the left and
right buttons. Thus, the left and right buttons sends a set fixed value.
The following figure shows the available settings for the two-button function "switch":
Figure 45: Settings: Two-button function - Switch
Button assignment On / Off: The left button sends the value On and the right button the value Off.
Button assignment Off / On: The left button sends the value Off and the right button the value On.
The following table shows the available communication objects:
Number
Name
Length
Usage
100
Direct buttons 1/2
–
switch
1 Bit
Switch function of the buttons
103
Direct buttons 1/2
–
State for display
1 Bit
State to refresh the display/symbol on the
button; has to be connected to the state of the
actuator to be switched
Table 80: Communication objects: Two-button function - Switch
Subfunction: Switch
Single-button function
With the single-button function "switch"
–
Subfunction “switch”, the button sends the respective
fixed value when pressed.
The following figure shows the available settings:
Figure 46: Settings: Single-button function "switch" - switch
The following table shows the available communication objects:
Number
Name
Length
Usage
100
Direct button 1
1 Bit
Switch function of the button
103
Direct button 1
–
State for display
1 Bit
State to refresh the display/symbol on the
button; has to be connected to the state of the
actuator to be switched
Table 81: Communication objects: Single-button function "switch" - switch
