MC Crypt 30 47 21, Operating Instructions Manual

Page: 39 / 104

39
6. Connections and Control Elements
2) 2-TRACK OUTPUT
The 2-TRACK INPUT sockets are mainly used for connecting the inputs of a recording device (e.g. CD recorder).
The 2-TRACK OUTPUT signal is assigned to MAIN MIX OUTPUT mix.
To take the MAIN MIX OUTPUT signal from the 2-TRACK OUTPUT socket, the 2TK TO MAIN
MIX switch must not be pressed.
LED Level Displays and MONITORING Section
1) 2-TRACK switch
Press the 2-TRACK switch to put the 2-TRACK INPUT signal on
the CONTROL ROOM output, the headphone socket and the
LED balancer display.
2) ALT 3-4 switch
Press the ALT 3-4 switch to put the ALT 3-4 bus signal on the
CONTROL ROOM output, the headphone socket and the LED
balancer display.
3) MAIN-MIX switch
Press the MAIN MIX switch to put the MAIN MIX bus signal on
the CONTROL ROOM output, the headphone socket and the
LED balancer display.
4) 2TK TO MAIN MIX switch
To send the 2-TRACK INPUT signal to the MAIN MIX bus, press the 2TK TO MAIN MIX switch. The 2-TRACK
INPUT sockets can also be used as an additional STEREO LINE input.
If the 2TK TO MAIN MIX switch is pressed, the MAIN MIX signal is no longer sent to the 2-TRACK
OUTPUT sockets.
5) POWER LED
The POWER LED lights up when the mixing desk is switched on.
6) +48 LED
The +48 LED lights up when the phantom feed is switched on.
Attention! Always observe the phantom feed instructions.