manualshive.com logo in svg

Mazda CX-5, Manual, Page: 610 / 840

Share
Download
Mazda CX-5 Manual Download Page 610

Side cargo sub-compartment

Open the cover to put small items in the cargo sub-compartment.

NOTE
Loading golf bags

(Some golf bags may not fit using the following methods depending on their sizes.)
Up to four golf bags can be carried in the luggage compartment.

(With luggage compartment cover)

When loading four golf bags, remove the luggage compartment cover and store it in the
cargo sub-compartment.
Refer to Luggage Compartment Cover on page 3-25.
For vehicles with a spare tyre, up to three golf bags can be carried in the luggage
compartment because there is no space to store the luggage compartment cover.
 
Bottom: Place the first and second golf bags in the luggage compartment with the bottoms
pointed to the right.
Top: Place the third golf bag with its bottom pointed to the left and the fourth golf bag with
its bottom pointed to the right in the luggage compartment.

The arrows indicate the bottoms of the golf bags.

Top

Bottom

The illustration shows the loading of four golf bags.

Interior Features

Interior Equipment

5-156

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments