Mazda CX-5, Manual

Page: 353 / 840

The system becomes operational when all
of the following conditions are met.

The system detects white (yellow) lane
lines on both the right and left sides or
on either side.

The vehicle speed is about 60 km/h (37
mph) or faster.

The vehicle is driven on a straight road
or road with gentle curves.

The engine is running.
The LAS & LDWS goes on stand-by
status in the following cases:

The system cannot detect white (yellow)
lane lines.

The vehicle speed is less than about 60
km/h (37 mph).

The vehicle is making a sharp curve.

The vehicle is making a curve at an
inappropriate speed.
NOTE

The LAS & LDWS remains on stand-by
until it detects white (yellow) lines on
both the left and right sides, or on either
side.

When the system detects a white
(yellow) lane line on one side only, the
system will not activate warnings for the
lane line on the side that is not being
detected.

The distance and warning sensitivity
(likelihood of a warning) which the
system uses to determine the possibility
of a lane departure can be changed.
Refer to Setting Change
(Personalisation Features) on page
9-13.
Vehicle lane line display
When the LAS & LDWS becomes
operational while on standby, the vehicle
lane lines are displayed in the
multi-information display. The system
changes to operational status display when
the system detects a white (yellow) line on
either the left or right.
(Stand-by status)
(Operational status)
Auto cancel
In the following cases, the LAS & LDWS
is automatically cancelled, the LAS &
LDWS warning indication (amber) turns
on, and an alert is displayed. When the
LAS & LDWS become operational, the
system turns back on automatically.

The temperature inside the camera is
high or low.

The windscreen around the camera is
foggy.

The windscreen around the camera is
blocked by an obstruction, causing poor
forward visibility.
When Driving
i-ACTIVSENSE
4-195
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48