Mazda CX-5 Manual Download Page 707

Page: 707 / 840

7. Remove the valve cap from the flat

tyre. Press the back of a valve core tool
to the core of the tyre valve and bleed
all the remaining air.

Valve core tool

Valve

Valve cap

CAUTION

If there is air remaining in the tyre when
the valve core is removed, the valve
core could fly out. Remove the valve
core carefully.

8. Turn the valve core anticlockwise with

the valve core tool and remove the
valve core.

Valve

Valve core

NOTE

Store the valve core in a place where it
will not get dirty.

9. Remove the plug from the injection

hose and insert the injection hose into
the valve.

Injection hose

Plug

10. Hold the bottom of the bottle upright,

squeeze the bottle with your hands,
and inject the entire amount of tyre
sealant into the tyre.

Valve

NOTE

The tyre sealant cannot be reused.
Purchase a new tyre sealant kit at an
Authorised Mazda Repairer.

11. Pull out the injection hose from the

valve. Reinsert the valve core into the
valve and turn it clockwise to install it.

If Trouble Arises

Flat Tyre

7-21

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands

Mazda CX-5, Manual

Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands