Mazda CX-5 Manual Download Page 310 | Manualshive

Page: 310 / 840

background image

Distance Recognition Support System (DRSS)

*

The DRSS measures the distance between your vehicle and a vehicle ahead using a radar
sensor (front) while the vehicle speed is about 30 km/h (19 mph) or faster, and if your
vehicle approaches a vehicle ahead more closely than what is appropriate for maintaining
distance between the vehicles according to the vehicle speed, a notification in the active
driving display is indicated to advise you to keep a safe distance from the vehicle ahead.

WARNING

Do not rely completely on the DRSS and always drive carefully:

The ability to detect a vehicle ahead is limited depending on the type of vehicle ahead, the
weather conditions, and the traffic conditions. Therefore, if the accelerator and brake pedals
are not operated correctly it could lead to an accident. Always verify the safety of the
surrounding area and depress the brake pedal or accelerator pedal while keeping a safer
distance from vehicles ahead or on-coming vehicles.

NOTE



The DRSS operates when all of the following conditions are met:



The ignition is switched ON.



The DRSS is on.



The selector lever is in a position other than reverse (R).



The vehicle speed is 30 km/h or faster (19 mph or faster).



The objects which activate the system are 4-wheeled vehicles.



The DRSS may also operate in the presence of motorcycles and bicycles.



The DRSS may not operate normally under the following conditions:



The Dynamic Stability Control (DSC) has a malfunction.



The vehicle ahead is travelling at an extremely slow speed.



The system does not operate with the following objects:



Vehicles approaching in the opposite direction.



Stationary objects (stopped vehicles, obstructions)

▼

Indication on Display

The DRSS operation status is indicated in the active driving display or multi-information
display. Regarding malfunctions, check the vehicle conditions or have it inspected by an
expert repairer, we recommend an Authorised Mazda Repairer according to the content of
the displayed message.

When Driving

i-ACTIVSENSE

4-152

*Some models.

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

«
...
308
309
310
311
312
...
»

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-5

Brand: Metra Electronics Pages: 14

Porsche 911 Turbo S Wheel

Brand: FANATEC Pages: 9

CK 3000 Evolution

Brand: Parrot Pages: 2

Brand: Uniden Pages: 16

Brand: Uniden Pages: 20

Brand: Conrad Pages: 26

2003 Thunderbird

Brand: Ford Pages: 200

Brand: Ford Pages: 38

Brand: Hyundai Pages: 280

RGBW Rock Lights

Brand: Lit Lightz Pages: 3

Brand: Fab Fours Pages: 21

2000 Oldsmobile Intrigue

Brand: Oldsmobile Pages: 348

Brand: Fiat Pages: 284

Brand: rough country Pages: 4

Brand: Volvo Pages: 197

Brand: Brodit Pages: 2

CHALLENGER GK-6125A 2018

Brand: Coolster Pages: 45

Brand: Goobay Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands