Mazda CX-5 Manual Download Page 572

Page: 572 / 840



A message list is created for each
device.



If the connected device does not
correspond to MAP 1.0, the AT
command is used to download. The
downloaded message indicates that it is
already read.



Downloading using the AT command
may not function depending on the
connected device.



If an iPhone is connected, the following
functions cannot be used.



Downloading past messages



Replying to messages



iPhone is a trademark of Apple Inc.,
registered in the U.S. and other
countries.

Receiving messages

(Method 1)

When a device receives a message, a
message received notification is displayed.

The “Email Notifications” (E-mail) or
“SMS Notifications” (SMS) setting must
be on.
Refer to Communication Settings on page
5-120.
Select

and display the message.

(Method 2)

1. Select the icon on the home screen

to display the Communication screen.

2. Select

and display the new

message list for E-mail and SMS.

3. Select the message you would like to

display.

The following icons are displayed in the lower part of the details on the message. Icons
which can be used differ depending on use conditions.

Icon

Function

Displays the Communication menu.

Displays the inbox.

Plays back a message.
When selected again, playback is temporarily stopped.

Displays the previous message.

Displays the next message.

Interior Features

Audio Set [Type B (touchscreen)]

5-118

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands

Mazda CX-5, Manual

Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands