Mazda CX-5, Manual

Page: 237 / 840

Shift-Lock System
The shift-lock system prevents shifting out
of P unless the brake pedal is depressed.
To shift from P:
1. Depress and hold the brake pedal.
2. Start the engine.
3. Press and hold the lock-release button.
4. Move the selector lever.
NOTE

When the ignition is switched to ACC or
the ignition is switched off, the selector
lever cannot be shifted from P position.

The ignition cannot be switched to OFF
if the selector lever is not in P position.
▼
Shift-Lock Override
If the selector lever will not move from P
using the proper shift procedure, continue
to hold down the brake pedal.
1. Remove the shift-lock override cover
using a cloth-wrapped flat head
screwdriver.
2. Insert a screwdriver and push it down.
Cover
3. Press and hold the lock-release button.
4. Move the selector lever.
Take the vehicle to an expert repairer, we
recommend an Authorised Mazda
Repairer to have the system checked.
Transaxle Ranges

The shift position indication in the
instrument cluster illuminates.
Refer to Indication/Indicator Lights on
page 4-35, 4-53, 4-69.

The selector lever must be in P or N
position to operate the starter.
P (Park)
P locks the transaxle and prevents the
front wheels from rotating.
WARNING
Always set the selector lever to P position
and set the parking brake:
Only setting the selector lever to the P
position without using the parking brake to
hold the vehicle is dangerous. If P fails to
hold, the vehicle could move and cause an
accident.
CAUTION

Shifting into P, N or R while the vehicle is
moving can damage your transaxle.

Shifting into a driving gear or reverse
when the engine is running faster than
idle can damage the transaxle.
R (Reverse)
In position R, the vehicle moves only
backward. You must be at a complete stop
before shifting to or from R, except under
rare circumstances as explained in
Rocking the Vehicle (page 3-55).
When Driving
Automatic Transaxle
4-79
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48