Mazda CX-5 Manual Download Page 347 | Manualshive

Page: 347 / 840

background image

WARNING

Do not rely completely on the LAS & LDWS:



The LAS & LDWS is not an automatic driving system. In addition, the system is not designed
to compensate for a driver's lack of caution, and over-reliance on the system could lead to
an accident.



The detection ability of the LAS & LDWS is limited. Always stay on course using the steering
wheel and drive with care.

Do not use the LAS & LDWS in the following cases:

The system may not operate adequately according to the actual driving conditions, resulting
in an accident.



Driving on roads with tight curves.



Driving under bad weather conditions (rain, fog, and snow).



Slippery roads such as ice or snow-bound roads.



Roads with heavy traffic and insufficient distance between vehicles.



Roads with no white (yellow) lane lines.



Narrow roads resulting from road construction or lane closures.



The vehicle is driven on a temporary lane or section with a closed lane resulting from road
construction where there may be multiple white (yellow) lane lines or they are interrupted.



Vehicle is driven on roads other than expressways and highways.



The tyre pressures are not adjusted to the specified pressure.



Tyres of a different specified size are used, such as an emergency spare tyre.

CAUTION

Heed the following cautions so that the LAS & LDWS can operate normally.



Do not modify the suspensions.



Always use wheels of the specified type and size for the front and rear wheels. Consult an
expert repairer, we recommend an Authorised Mazda Repairer for tyre replacement.

NOTE



When the direction indicator lever is operated for a lane change, the LAS & LDWS is
automatically disabled. The LAS & LDWS becomes operational again when the direction
indicator lever is returned and the system detects white (yellow) lane lines while the
vehicle is being driven normally within its vehicle lane.

When Driving

i-ACTIVSENSE

4-189

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

«
...
345
346
347
348
349
...
»

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for CX-5

GRAND CHEROKEE 2023

Brand: Jeep Pages: 108

Brand: Chevrolet Pages: 494

Brand: Meta System Pages: 16

OCTAVIA - TECHNICAL CHANGES 11-2009

Brand: Skoda Pages: 16

Brand: MULTILIFT Pages: 62

Brand: ConWys AG Pages: 16

Brand: WABCO Pages: 34

OPTIA hybrid 2020

Brand: Kia Pages: 54

Brand: Webasto Pages: 23

Security Cage Kit

Brand: Toro Pages: 8

Brand: Acura Pages: 7

84 61 0 028 926

Brand: BMW Pages: 13

Brand: Roadtrek Pages: 61

Brand: Yakima Pages: 11

2011 Camry SE V6

Brand: Toyota Pages: 33

Brand: Volvo Pages: 92

Brand: Great day Pages: 5

ESCALADE EXT - DATASHEET 2011

Brand: Cadillac Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands