manualshive.com logo in svg

Mazda CX-5, Manual, Page: 296 / 840

Share
Download
Mazda CX-5 Manual Download Page 296

Switching to high beams

Turn the headlight switch to the 
position.
The HBC indicator light (green) turns off
and the   is illuminated.

Adaptive LED Headlights

(ALH)

*

The ALH are a system which uses the
Forward Sensing Camera (FSC) to
determine the situation of a vehicle ahead
or a vehicle approaching in the opposite
direction while driving at night to
automatically switch the illumination
range of the headlights, the illuminated
area, or the illumination brightness.
Refer to Forward Sensing Camera (FSC)
on page 4-248.
The ALH are controlled between high and
low beams as follows to assure the driver’s
visibility without dazzling a vehicle ahead
or a vehicle approaching in the opposite
direction.

Glare-Free High Beam

This feature dims only the high-beam light
shone on the vehicle ahead.
The high beams will dim while driving at
a speed of about 40 km/h (25 mph) or
faster. When the vehicle speed is less than
about 30 km/h (18 mph), the beams switch
to the low beams.

NOTE

The headlight high-beam indicator light
turns on while the high beams are on.

When Driving

i-ACTIVSENSE

4-138

*Some models.

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments