Mazda CX-5 Manual Download Page 515

Page: 515 / 840

NOTE



The applicable phrase appears in the
audio display.



After user voice registration is
completed, voice guidance “Speaker
enrolment is complete” is announced.

Voice recognition learning on/off

1. Press the pick-up button or talk button

with a short press.

Say:

[Beep] “Voice training”

Prompt:

“Enrolment is enabled/

disabled. Would you like to disable/
enable or retrain?”

Say:

[Beep] “Disable” or “Enable”

5. When “Disable” is spoken, the voice

recognition learning is turned off.
When “Enable” is spoken, the voice
recognition learning is turned on.

Prompt:

“Speaker Enrolment is

disabled/enabled.”

Interior Features

Audio Set [Type A (non-touchscreen)]

5-61

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands

Mazda CX-5, Manual

Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands