Mazda CX-5, Manual

Page: 29 / 840

Refer to Height Adjustment on page 2-19.
▼
Driving Position Memory
*
The desired driving position can be called
up after programming the position.
The following driving positions can be
programmed.

Driver’s seat position (seat slide, height
adjustment, front edge of seat bottom,
seat recline)
Refer to Adjusting the Driver's Seat on
page 2-5.

Active driving display (display position,
brightness level, display information)
Refer to Active Driving Display on page
4-73.
CAUTION
Do not place fingers or hands around the
bottom of the seat while the seat memory
function is operating. The seat moves
automatically while the seat memory
function is operating and fingers or hands
could get pinched and injured.
SET button
1
2
A driving position can be programmed or
operated using the buttons on the side of
the seat or the key.
NOTE

Lumbar support adjustment cannot be
programmed.

A driving position can be programmed
to the buttons on the side of the seat and
the key in use for driving the vehicle.

If the vehicle has been serviced and the
battery leads disconnected, the
programmed seat positions will have
been erased. Re-programme the seat
positions.
Programming
1. Make sure the parking brake is on.
2.
(Automatic transaxle)
Make sure the selector lever is in the P
position.
3. Start the engine.
4. Adjust the seat and the active driving
display to the desired driving position.
5. Press the SET button on the seat until a
beep sound is heard 1 time.
6. Perform one of the following settings
within 5 seconds of completing step 5
above:

Programming using a button on
the side of the seat
Press the button you want to
programme, either button 1 or 2,
until a beep sound is heard 1 time.

Programming using the key
Press the key button until a beep
sound is heard 1 time.
NOTE
If a beep sound is heard 3 times, the
operation is cancelled.
Essential Safety Equipment
Seats
*Some models.
2-11
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48