Mazda CX-5, Manual

Page: 247 / 840

CAUTION

Do not shade the light sensor by adhering a sticker or a label on the windscreen. Otherwise
the light sensor will not operate correctly.

The light sensor also works as a rain sensor for the auto-wiper control. Keep hands and
scrapers clear of the windscreen when the wiper lever is in the
position and the
ignition is switched ON as fingers could be pinched or the wipers and wiper blades
damaged when the wipers activate automatically. If you are going to clean the windscreen,
be sure the wipers are turned off completely
―
this is particularly important when clearing
ice and snow
―
when it is particularly tempting to leave the engine running.
NOTE

The headlights and other exterior lights may not turn off immediately even if the
surrounding area becomes well-lit because the light sensor determines that it is night time
if the surrounding area is continuously dark for several minutes such as inside long
tunnels, traffic jams inside tunnels, or in indoor parking lots.
In this case, the lights turn off if the light switch is turned to the
position.

The sensitivity of the auto-light control may be changed.
Refer to Personalisation Features on page 9-13.
When Driving
Switches and Controls
4-89
CX-5_8HD5-EE-18K_Edition2 2018-11-22 13:14:48