Mazda CX-5 Manual Download Page 565

Page: 565 / 840

Icon

Function

Plays the station. Select it again to pause playback.

Goes to the next station.

Displays sound settings to adjust audio quality level.
Refer to Volume/Display/Sound Controls on page 5-71.

Station list

1. Select the

icon to display the station list.

Favourites station name: Select to display the programme registered to your

favourites.

Category name: A recommended category selected from your favourites by

Stitcher™ is displayed.
Select it to display the category programme.

2. Select the programme name to play it.

Add to your favourites

If the current programme has not been
registered to your favourites, it can be
registered to your favourites.
1. Select the

icon to display the

favourites station which the
registration can be added.

2. Select the station name which you

want to register.

3. Select

to add the programme to the

selected favourites station.

NOTE



Multiple favourites stations can be
selected and registered.



Favourites stations registered by oneself
as well those set by default are
displayed.

Delete from your favourites

If the current programme has already been
registered to your favourites, the
programme can be deleted from your
favourites.
1. Select the

icon.

Interior Features

Audio Set [Type B (touchscreen)]

5-111

CX-5_8HD5-EE-18K_Edition2

2018-11-22 13:14:48

Summary of Contents for CX-5









































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands

Mazda CX-5, Manual

Search results

Summary of Contents for CX-5

Reviews:

Related manuals for CX-5

Brands by name

Popular brands