Martin p Xciter User Manual Download Page 37 | Manualshive

Page: 37 / 120

Martin p Xciter User Manual Download Page 37

Fixture library

Xciter

user

manual

37

Xciter puts the shutter close value on the shutter channel when you pull the master intensity fader below
3%. This is especially useful when the fixture has a shutter but no dimmer. With the shutter close value,
you can still black it out when the master intensity goes to 0%.

13.

Press [ESC] to go back to the fixture definition editor.

14.

Press [ESC] again to exit the fixture definition editor.

Xciter will ask to store the new fixture definition.

Press {Yes} to accept, {No} to decline.

8.1.2

Edit existing fixture definition

First you have to locate the definition in the category and manufacturer subfolders.

1.

Select the definition you wish to edit.

2.

Press [EDIT] to edit the selected fixture definition.

Use the same procedure as described in 8.1.1 to edit the definition.

Xciter will not allow you to edit critical parameters (like channel cnt) of a fixture definition if this definition is
used in the patch.

8.1.3

Remove fixture definition

First you have to locate the definition in the category and manufacturer subfolders.

1.

Select the definition you wish to remove.

2.

Press [CLEAR] to remove the selected fixture definition. Xciter will ask for a confirmation.

3.

Press {Yes} to confirm, {No} to cancel.

Xciter will not allow you to delete a fixture definition if this definition is used in the patch.

«
...
35
36
37
38
39
...
»

Summary of Contents for Xciter

























































































































Reviews:

No comments