manualshive.com logo in svg

Martin p Xciter, User Manual, Page: 106 / 120

Share
Download
Martin p Xciter User Manual Download Page 106

Run mode features 

106 

Xciter user manual 

 

11.

 

Press [ESC] to leave the cue list editor. Xciter will return to cue list selection where you can launch the cue 
list. 

15.5.3

 

Run cue list 

1.

 

Make sure you have selected a list with content. 

2.

 

Press [CL] to run the list. 
 

 

 
When the cue list is running, the following information is displayed on the main LCD: 

•

 

List: the current cue list (the one you just selected to run). 

•

 

PP: the playback page that is displayed on the fader LCD. 

•

 

Step: the current step in the cue list along with its parameters on the right side. 

•

 

Cue: the cue that is attached to the current step. 

3.

 

All transitions between steps are automatic, except for steps with the ‘GO’ option. When you see a GO on 
the second line of the LCD, Xciter is waiting for an action from the user. The right arrow button starts 
blinking. Press this button to proceed to the next step. 

4.

 

Press [CL] at any time to stop the automated show and return to the cue list selection to launch another 
one. 

Note that playbacks are also available during the automated show. As the cues are launched in the list, the 
linked playback pages will also be brought up. Use the general purpose number keys or centre top scroll wheel 
to scroll through the pages manually. 

If you have some-audio triggered sequences in the cues or playbacks, you can access the audio settings with 
[•]. You can adjust the audio settings the same way you do in cue mode. 

15.5.4

 

Clear cue list 

1.

 

Make sure you have selected a list with content. 

2.

 

Press [CLEAR] to delete all steps in the list. 

 

3.

 

Press [Yes] to confirm, [No] to cancel. Xciter returns to cue list selection. 

15.5.5

 

Edit an existing cue list 

1.

 

Make sure you have selected a list with content. Example: select cue list 1/01 

2.

 

Press [EDIT] to call the cue list editor. 
 

Summary of Contents for Xciter

























































































































Reviews:

No comments