Section 5 – Operation
20
5-1.
Transmitter Buttons.
ON/OFF
On the
tele
Pilot
and Pendant Transmitter ON and OFF is the same button. Pushing this button
toggles between turning the transmitter ON and then sending the ON command to the receiver and sending
the OFF command to the receiver and then turning the transmitter OFF.
NOTE
IN THE
TELE
PILOT
THE TRANSMITTER DOES NOT TURN ON TILL THE ON PUSHBUTTON IS
RELEASED AFTER BEING DEPRESSED TO TURN ON. THE OFF FUNCTION IS IMMEDIATE
UPON DEPRESSING THE ON/OFF PUSHBUTTON.
(Membrane only) ON
Turns the transmitter ON and then sends the ON command to the receiver.
OFF
Sends the OFF command to the receiver and then turns the transmitter OFF.
E-STOP (EMS) –
Stops all equipment movement and disables all functions except Alarm. Reset the
system for normal operation by turning the transmitter “OFF” then “ON”. Use for emergencies only
(NOT
FOR NORMAL SHUT DOWN).
NOTE
ON THE
TELE
PILOT
TRANSMITTER THE USER CAN CHOOSE AND CUSTOM LABEL THE
FUNCTIONS FOR A SPECIFIC MOTOR; THE FUNCTIONAL DESIGNATIONS SHOWN BELOW
ARE COMMON AND TRADITIONAL DESIGNATIONS.
Common 2-Speed Designations Listed Below:
Motor 1 Dir 1, (Hoist) UP
– Selects hoist movement in the UP direction speed one (first switch position)
or speed two (second switch position).
Motor 1 Dir 2, (Hoist) DN/DOWN
– Selects hoist movement in the DOWN direction speed one (first
switch position) or speed two (second switch position).
UP DN
E W
N S
1 2
3
ON OFF
E
STOP
AUX 1
AUX 2
AUX 3
AUX 4
A B B
OTH
ON/OFF E-STOP
Figure 5-1.
telePilot,
Pendant and Membrane
E-STOP
ON/OFF
&
Low Battery Indicators
Motor 1
Dir 1
Dir 2
Motor 2
Dir 1
Dir 2
Motor 3
Dir 1
Dir 2
ON/
OFF
Optional
4
th
Motor or Select Indicators
Auxiliary
Controls
AUX 1
AUX 2
AUX 3
2-Speed and Single-Speed
telePilot
Pendant and Membrane
ON/
OFF
6
5
4
3
2
7
8
9
10
11
12
1
TX12M-2
TX12M-1
A B
UP
DOWN
NORTH
SOUTH
EAST
WEST
