Section 7 – Programming (Continued)
69
7-8.
telePilot
Programming.
Read Section 5-5. Additional
tele
Pilot
Operational Features to familiarize you with the features listed below. The
tele
Pilot
transmitter remote unit for programming uses a PDA (Personal Digital Assistant). Such products as Palm Pilot
®
or many
other products using Palm OS
®
can be used to run the
tele
Pilot
programming software. If unsure if your PDA will work or
for a recommended product contact the appropriate Telemotive representative or check our website. The software for the
PDA is available on a disk shipped with your unit, can be emailed from your Telemotive representative or downloaded
from our Website at www.telemotive.com.
tele
Pilot
PDA software is quite user friendly and is intended to mimic the dip switch settings used in other Telemotive
products without the inconvenience of having to open the transmitter case. The PDA software allows you to select
frequency, access code, time-out-timer settings, switch arrangement and crane configuration as in other Telemotive
transmitter products.
Load the
tele
Pilot
programming software into your PDA, refer to your PDA manual or contact Telemotive for the
appropriate procedure. Once loaded, look for the Telemotive circle and hook logo labeled
tele
Pilot
for the appropriate
application. Select this application to begin programming.
With the
tele
Pilot
programmer you can load up to four different transmitter types for use on 10K, 9000 and/or 9100
systems. Each transmitter configuration is stored in a “Bank”. There are up to four banks available. This Bank feature is
like having four completely different transmitters in one unit. Up to four Banks (operational configurations) are possible. A
Bank is a specific configuration of user-defined parameters including:
System
type
Frequency
Access
codes
Also
possible:
Key
arrangement
Relay configuration
Tandem
disable
Invert crane select
Time-out-timer
time
Mode
selection
Alarm
settings
After loading the
tele
Pilot
program the first screen is the initial setup screen.
telePilot
1 SPD
2 SPD
Name: ……………………………..…. M
Tx Type
2 SPD
Use bank password
telePilot Programmer
First press
Button 6
Second press
Button 5
Third press
Button 4
Fourth press
Button 3
Bank 1
Bank 2
Bank 3
Bank 4
off
off off off
