Section 7 - Programming (Continued)
71
WARNING
DISABLING THE PASSWORD FUNCTION IS PUTS THE SYSTEM IN ACTIVE BANK SELECT. THIS ALLOWS
THE CRANE OPERATOR TO SWITCH BETWEEN BANKS QUICKER. THE OPERATOR IN THIS MODE MUST
BE AWARE AND RESPONSIBLE FOR ALL POSSIBLE CONTROLLED CRANES. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT
.
Bank Selection (At least one must be selected).
When done with the password section. Select the number of Bank you wish to program and tap the cell labeled with the
appropriate Bank number.
The screen should switch to the Setup Bank screen shown below. Complete the Bank setup as described below and hit
save. The PDA will revert to the initial screen and the cell for the just programmed Bank should darken and the word “on”
appears. Tap on the cell labeled with the next bank you wish to program and a similar “Setup” screen to the one shown
below will appear. Continue doing this until you have programmed the four Banks.
You do not have to use all Banks and you do not have to use them in order.
Even after programming a Bank you can turn it back “off”. A programmed Bank will not lose its programming by turning
it “off”. By turning ON and OFF Banks you can easily save certain transmitter configurations in the transmitter to turn
them on at a later time with the PDA without having to completely reprogram them.
Bank Programming Setup Screen (Must select system).
The number of the Bank will appear at the top of the screen.
Before selecting any programming feature first go to
“System” and select the system type
. Tap on the “System" arrow and select 10K, 9000, 9001, 9100 or 9101 type system.
The TR12 Receiver is a 10K type system. If you are unsure of the type of system you have refer to the cover of the systems
operating manual for the appropriate system or call your Telemotive representative. After selecting system type, your
programming screen will change to match the type of system selected.
Bank 1
Bank 2
Bank 3
Bank 4
off
off
off
off
System
10K
Freq
AK01
Setup Bank #
A1
Receiver access code
1
0
B1
1
0
Multibox
Auto Turn Off
S3-1
1
0
Timer
Switch conf.: H,T,B
Main/Aux Aux
Save
Cancel
10K
9000
9100
10K
9001
9101
1-SPD 2-SPD
