Section 8 – RCP Programming (Continued)
99
1.
Turn the transmitter ON and line up the IR adaptor as above.
2.
Click “Receive” and follow onscreen prompts.
3.
RCP will confirm reception and automatically display current programming in the
telePilot
unit.
Reading the telePilot ID and history.
To read an identity (an identity is the name that was programmed in by step 5 of Sending a Program To The
telePilot
, listed
previously) from the
telePilot
Transmitter:
1.
Turn the transmitter ON and line up the IR adaptor as above.
2.
Click receive.
3.
RCP will read: Unit ID and history and display them when the appropriate onscreen buttons are clicked.
Reading the RCP Software Version.
1.
Select “Help”
2.
Select “About”
3.
Unit will read: RCP Software Version number.
4.
Select the item(s) you wish to send.
5.
Wait for confirmation text on PDA screen:
Error Statements and Codes.
Tx Type Mismatch: if while attempting to program a
telePilot
you receive an error code such as “Error AAAB”, you have
selected a different style transmitter in the PDA than you are attempting to program. Most common cause is trying to
program a 2-speed
telePilot
with 1-speed selected or vice versa.
NOTE
TO PROGRAM OR READ DATA FROM THE
telePilot
, THE TRANSMITTER MUST BE TURNED ON.
