Section 5 – Operation (Continued)
21
11/11/2014
Motor 2 Dir 1, (E Membrane)/NORTH Pendant
– Selects the appropriate direction of the bridge or
trolley (depending how unit is wired at installation) speed one (first switch position) or speed two (second
switch position).
Motor 2 Dir 2, (W Membrane)/SOUTH Pendant
– Selects the appropriate direction of the bridge or
trolley (depending how unit is wired at installation) speed one (first switch position) or speed two (second
switch position).
Motor 3 Dir 1, (N Membrane)/EAST Pendant
– Selects the appropriate direction of the bridge or trolley
(depending how unit is wired at installation) speed one (first switch position) or speed two (second switch
position).
Motor 3 Dir 2, (S Membrane)/WEST Pendant
– Selects the appropriate direction of the bridge or trolley
(depending how unit is wired at installation) speed one (first switch position) or speed two (second switch
position).
(
telePilot
Only) Optional 4
th
Motor Or Select with Indicators
The AUX 3 pushbutton can be designated as an auxiliary motor select. As an example, for systems that
have a main and auxiliary hoist, pushing this switch will toggle the function of the set of motor 1
pushbuttons between the outputs for main and auxiliary hoist.
There are two red LEDs above this pushbutton labeled “A” and “B”. The “A” LED comes ON for the main
function and the “B” comes ON for the auxiliary. As the pushbutton is toggled the sequence of outputs and
LEDs is as follows. Normally the main output only is active and the “A” LED is lit. Pushing the pushbutton
lights only the “B” LED and the auxiliary output only is active. Pushing the pushbutton a second time lights
both “A” and “B” LEDs and both main and auxiliary outputs are active in tandem (this tandem operation
can be disabled See Section 7-8.
tele
Pilot
Programming). When turning the transmitter ON the default
condition is always “A”.
This pushbutton can be used with the Select function also. When used for the Select function the “A” and
“B” LEDs work as described in the above paragraph when toggling the Select 1 output and the Select 2
outputs respectively.
1, 2 And 3 (AUX 1, AUX 2, and AUX 3)
– Selects the Auxiliary relay(s), which may be used for a
warning device as a horn or other function.
A B
