Magnetek IMPULSE G+ Mini, Technical Manual

Page: 170 / 182

IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 170
O02.10 Motor Power Units 00 00~01 126
00: HP
01: kW
O03.01 Elapsed Time Setting 0000 0000–9999 hr 127
O03.02 Elapsed Time Selection 01 00, 01 - 127
00: Power On Time
01: Running Time
O03.03 Fan On Time 0000 0000–9999 hr 127
O03.05 Capacitor Maintenance Time 000 000–150 % 127
O03.07 Pre-Charge Relay Maintenance Setting 000 000–150 % 127
O03.09 IGBT Maintenance Setting 000 000–150 % 127
O03.11 Fault Trace Clear 00 00, 01 - 127
00: Not Cleared
01: Clear U2/U3
O03.12 kWh Monitor Initial Value Selection 00 00, 01 - 127
00: Save
01: Reset
O03.14 Clear Count History 00 00–03 - 127
00: Not Clear
01: Clear AC Count
02: Clear OL/LC Count
03: Clear Both Counts
T01.01 Tuning Mode Select 02 00, 02, 03 - 48
00: Rotating Auto-Tune (OLV)
02: Stationary Auto-Tune
T01.02 Motor Rated Power - - HP/kW 48
T01.04 Motor Rated Current - - A 48
T01.05 Motor Rated Frequency 60.00 0.00–150.00 Hz -
T01.06 Motor Poles 04 02–48 - 48
T01.07 Motor Rated Speed 1750 0–24000 RPM 48
U01.01 Frequency Reference - - Hz 128
U01.02 Output Frequency - - Hz 128
U01.03 Output Current - - A 128
U01.04 Control Method - - - 128
U01.05 Motor Speed (OLV Only) - - Hz 128
U01.06 Output Voltage - - VAC 128
U01.07 DC Bus Voltage - - VDC 128
U01.08 Output Power - - HP/kW 128
U01.09 Motor Torque (OLV Only) - - % 128
U01.10 Input Terminal Status - - - 128
Parameter Parameter Name Default Range Units Page