![background image](http://html1.mh-extra.com/html/magnetek/impulse-g-mini/impulse-g-mini_technical-manual_3605595035.webp)
IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 35
4.2.2 Keypad LED and Button Functions
Some of the keypad buttons, whose functions are described below, are dual-purpose. The dual-purpose keys have
one function when used in a view-only mode, and another function when used in a programming mode.
4.2.2.1
Keys and Displays on the LED Keypad
No.
Display
Name
Function
1
Data Display Area
Displays the frequency reference, parameter number, etc.
2
ESC Key
Returns to the previous menu (before ENTER Key is pressed), or
cursor position.
3
RESET Key
Moves the cursor to the right.
Resets the VFD to clear a fault situation.
4
RUN Key
Pressing the key initiates the RUN command when LOCAL mode
operation is selected.
Starts the auto-tuning process.
5
Up Arrow Key
Scrolls up to select the next parameter group or parameter settings. It
also increases the value of the blinking digit of a parameter setting.
6
Down Arrow Key
Scrolls down to select the next parameter group or parameter
settings. It also decreases the value of the blinking digit of a
parameter setting.
7
STOP Key
Stops the VFD by initiating a base block STOP command.
8
ENTER Key
Selects modes or parameters. Displays each parameter’s set value.
By pressing this key again, the set value is stored.
9
LO/RE Selection Key
Pressing the key once displays support phone number 866-624-
7378.
Pressing the key again shows control method, motion, and reference
speed.
Pressing the key again will show RESET. Pressing the ENTER Key
afterwards will reset the maintenance timers.
Summary of Contents for IMPULSE G+ Mini
Page 15: ...IMPULSE G Mini Technical Manual November 2020 Page 15 Figure 2 1 Long Time Storage...
Page 18: ...IMPULSE G Mini Technical Manual November 2020 Page 18 Figure 2 4 Diagram C...
Page 181: ......
Page 182: ...IMPULSE G Mini Adjustable Frequency Crane Controls Technical Manual November 2020...