![background image](http://html1.mh-extra.com/html/magnetek/impulse-g-mini/impulse-g-mini_technical-manual_3605595118.webp)
IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 118
L08.15
OL2 Sel @ Low Spd
Enables/disables OL when output frequency <
6 Hz
00, 01
01
00 Disabled
NOTE:
Setting depends on D10.02
01 Enabled
L08.18
Soft CLA Sel
Enables/disables the software current limit
function. Limits output frequency when current
exceeds 110% of rated.
00–01
01
00 Disabled
01 Enabled
L08.19
Overheat Pre-Alarm Frequency
Reduction Rate
Specifies the frequency reference reduction
gain at overheat pre-alarm when L08.03 = 4.
0.1–0.9%
0.8
L08.35
Mounting Selection
Mounting selection
00–03
00
00 Open Chassis
01 Side-by-Side
02 NEMA 1
03 Finless
L08.41
High Current Alarm Selection
High current alarm selection
00–01
00
00 Disable
01 Enable
Parameter
Name
Function
Range
Default
* Value depends on VFD model
Summary of Contents for IMPULSE G+ Mini
Page 15: ...IMPULSE G Mini Technical Manual November 2020 Page 15 Figure 2 1 Long Time Storage...
Page 18: ...IMPULSE G Mini Technical Manual November 2020 Page 18 Figure 2 4 Diagram C...
Page 181: ......
Page 182: ...IMPULSE G Mini Adjustable Frequency Crane Controls Technical Manual November 2020...