![background image](http://html1.mh-extra.com/html/magnetek/impulse-g-mini/impulse-g-mini_technical-manual_3605595037.webp)
IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 37
4.2.3 Quick Start Guide Information
Basic programming of the VFD consists of entering motor parameters, choosing a motion, and selecting a speed
reference.
After applying power to the VFD, the display will show the output frequency of 0.00.
Navigation Keys:
The above figure shows the keypad on the G+ Mini. These keys are used for navigation and for changing various
settings within the VFD.
Use the
and
keys to change the display and/or change the value of a parameter.
Use the
key to move the cursor to the right and to reset the VFD after a fault.
Use the
key to view and save any parameter changes or the
key to exit without saving changes.
Setting Motion:
From the output frequency display, press the
key five times until the display shows the parameter menu
(PAr).
Press
. The display will show A01.01.
Press
two times to move the blinking digit to the right.
Press
until the parameter A01.03 (Motion) appears.
Press .
Summary of Contents for IMPULSE G+ Mini
Page 15: ...IMPULSE G Mini Technical Manual November 2020 Page 15 Figure 2 1 Long Time Storage...
Page 18: ...IMPULSE G Mini Technical Manual November 2020 Page 18 Figure 2 4 Diagram C...
Page 181: ......
Page 182: ...IMPULSE G Mini Adjustable Frequency Crane Controls Technical Manual November 2020...