Magnetek IMPULSE G+ Mini, Technical Manual

Page: 127 / 182

IMPULSE
®
•G+ Mini Technical Manual
November 2020
Page 127
5.9.3 Clear History
Parameter Name Function Range Default
O03.01 Elapsed Time Setting Accumulated operation time displayed in
monitor U04.01. 0000–9999hr 0000
O03.02 Elapsed Time Selection Selects how the Elapsed Time is accumulated 00, 01 01
00 Power On Time
01 Running Time
O03.03 Fan ON Time Set Sets the value of the Fan Operation Time
monitor (U04.03) in units of 10 hours. A setting
of 30 = 300 hours 0000–9999 x
10hr
0000
O03.05 Capacitor Maintenance
Setting DC Bus Capacitors maintenance time displayed
in U04.05 as a percentage of the total expected
performance life. 000–150% 000
O03.07 Pre-Charge Relay
Maintenance Setting Pre-Charge Relay maintenance time displayed
in U04.06 as a percentage of the total expected
performance life. 000–150% 000
O03.09 IGBT Maintenance Setting IGBT maintenance time displayed in U04.07 as
a percentage of the total expected performance
life. 000–150% 000
O03.11 Fault Trace Clear Clears Fault History 00, 01 00
00 Not Cleared
01 Clear U2/U3
O03.12 kWh Monitor Initial Value
Selection Sets kWh Monitor Initial Value 00, 01 00
00 No Reset
01 Reset
O03.14 Clear Count History Clears count history 00–03 00
00 Not Clear
01 Reset Runs
02 Clear OL/LC Count
03 Clear Both Counts