![background image](http://html1.mh-extra.com/html/magnetek/2001-g-m/2001-g-m_instruction-manual_3598661182.webp)
IMPULSE•G+ Mini Advanced Instruction Manual – March 2014
A-18
L06.01
Torque Detection 1 Level Select
00: Disabled
01: Overtorque @ Speed Agree (Alarm)
02: Overtorque @ Run (Alarm)
03: Overtorque @ Speed Agree (Fault)
04: Overtorque @ Run (Fault)
05: Undertorque @ Speed Agree (Alarm)
06: Undertorque @ Run (Alarm)
07: Undertorque @ Speed Agree (Fault)
08: Undertorque @ Run (Fault)
00
00–08
--
5-72
L06.02
Torque Detection 1 Level
150
0–300
%
5-73
L06.03
Torque Detection 1 Time
0.1
0.0–10.0
sec
5-73
L06.04
Torque Detection 2 Level Select
00: Disabled
01: Overtorque @ Speed Agree (Alarm)
02: Overtorque @ Run (Alarm)
03: Overtorque @ Speed Agree (Fault)
04: Overtorque @ Run (Fault)
05: Undertorque @ Speed Agree (Alarm)
06: Undertorque @ Run (Alarm)
07: Undertorque @ Speed Agree (Fault)
08: Undertorque @ Run (Fault)
00
00–08
--
5-73
L06.05
Torque Detection 2 Level
150
000–300
%
5-74
L06.06
Torque Detection 2 Time
0.1
0.0–10.0
sec
5-74
L06.08
Mechanical Weakening Detection
Selection
00: Disabled
01: Speed (signed) > L06.09; Continue
Running (Alarm)
02: Speed (unsigned) > L06.09; Continue
Running (Alarm)
03: Speed (signed) > L06.09; Stop
(Protection)
04: Speed (unsigned) > L06.09; Stop
(Protection)
05: Speed (signed) < L06.09; Continue
Running (Alarm)
06: Speed (unsigned) < L06.09; Continue
Running (Alarm)
07: Speed (signed) < L06.09; Stop
(Protection)
08: Speed (unsigned) < L06.09; Stop
(Protection)
00
00–08
--
5-74
L06.09
Mechanical Weakening Detection Level
110.0
-110.0–110.0
%
5-74
L06.10
Mechanical Weakening Detection Time
0.1
0.0–10.0
sec
5-74
L06.11
Mechanical Weakening Start Time
0
0–65535
hrs
5-74
L08.02
Overheat Pre-Alarm Level
95
50–130
°C
5-75
L08.03
Overheat Pre-Alarm Selection
00: Decel to Stop
01: Coast to Stop
02: Fast Stop
03: Use B03.03 Stopping Method
04: Alarm Only
05: Derated Operation (L08.19)
05
00–05
--
5-75
L08.05
Input Phase Loss Selection
00: Disabled
01: Enabled
01
00–01
--
5-75
Parameter Parameter Name
Default
Range
Units
Reference
Page
* Parameters defaults changed by X-Press Programming
** Parameters changed by E01.03
*** Value depends on drive model
**** Default value depends on control method
Summary of Contents for 2001-G+M
