Mackie DL1608 Reference Guide V1.2
48
An open gray box with only the master fader’s name works, but let’s spice it up with an image.
There are several options in this department. From the popover, tap “Image” to reveal a new
popover as seen below [Image Source]. You will be presented with four choices:
Use Camera
—
If you’re familiar with how the camera on the iPad works, then you’re in luck...this one works
the exact same way! The encircled camera icon in the middle of the gray bar snaps the picture and the icon
in the upper-right corner selects between the front and back camera on the iPad. [Camera is unavailable on
the fi rst generation iPad].
Select Photo
—
Here you may select from all the photos that currently reside on your iPad.
Select Icon
—
Or select from a multitude of built-in icons at your disposal.
Clear Image
—
Believe it or not, tapping here will clear the image for that channel.
Since we already named the master fader the PA, we might as well go with the PA icon to
boot, right? Tap the PA icon in the lower-left corner. The master fader is set: name and image.
Image Source
Select Icon
Select Photo
Use Camera
