Mackie DL1608 Reference Manual Download

Page: 109 / 121

Mackie DL1608 Reference Guide V1.2

109

Live Sound: Two Mixers, One iPad

So you say you have a snake. We prefer dogs, cats or fi sh for pets, but snakes are cool, too.

How about an analog snake; do you have one of those in your arsenal? The snake is a

great tool for cutting down on cable spaghetti.

This setup is ideal for clubs utilizing one mixer for FOH and one mixer for monitors.

Connect all inputs and outputs from the FOH and monitor mixers to the snake.

Next, connect all of the drum, guitar cabinet and vocal mics, DI box, etc, TO the snake.

The main PA and monitors receive input FROM the snake.

Also notice that there is only one iPad in this illustration. It only takes one engineer and one iPad to run

both mains and monitors at this particular venue.

The last thing to notice is the crowd...they’re going crazy for this band! This must be some weird,

underground, cult club since no one there [band or fans] has any feet or hands, not to mention hair,

facial features, etc. There may be a lot missing, but what’s not missing is the energy...the place is rockin’!

Wireless

Router

(Wi-Fi)

Mackie HD1521

Loudspeaker

and HD1801

Subwoofer

Mackie HD1521

Loudspeaker

and HD1801

Subwoofer

FOH Mixer

Monitor Mixer

Headphones

Mackie HD1221 (for monitors)

Summary of Contents for DL1608


























































































































Search results

Summary of Contents for DL1608

Reviews:

Related manuals for DL1608

Brands by name

Popular brands

Mackie DL1608, Reference Manual

Search results

Summary of Contents for DL1608

Reviews:

Related manuals for DL1608

Brands by name

Popular brands