manualshive.com logo in svg

Mackie DL1608, Reference Manual

Share
Download
Mackie DL1608 Reference Manual Download Page 108

Mackie DL1608 Reference Guide V1.2

108

Here’s a setup for all the musicians out there who whine for “more me” in the mix. Set up and connect each 

musician’s instrument, the PA and monitors just like they would be in any other live situation. 

The house engineer’s iPad is connected and locked to the DL1608 where he/she will set the LR main mix,  

as well as get the 2-track recording of the band’s live show. 

Up to 10 iPads may be connected to the DL1608 wirelessly. As such, each band member may control  their 

own mix from their own “station”. As seen in the illustration above, the vocalist, guitarist, bassist, keyboardist, 

drummist and DJist each have an iPad. Six musicians, six iPads, six auxes. Coincidence? We think not. Whining 

problem solved!

Live Sound: Self-Engineered

Keyboardist

Bassist

Vocalist

Guitarist

Wireless

Router

(Wi-Fi)

Engineer’s

Headphones

Drummist

DJist

Summary of Contents for DL1608


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands