Mackie DL1608 Reference Guide V1.2
63
FX View
From left to right, each eff ect displays the following:
Eff ect Type
—
The reverb and delay each display the currently selected eff ect type (as a button
which reveals a popover when tapped) and an accompanying image. These selections are global
and aff ect all channels sent to the eff ects as there is only one reverb and one delay on the DL1608.
Eff ect types are described in more detail in a few pages.
FX Sends
—
There are two vertical send channel faders and meters, one for each eff ect.
These control the level being sent to the eff ect from the current channel.
Notice in the image to the left that the color of each send fader matches
the color of the reverb and delay output selector.
The reverb and delay send meters display the summed signals from all channel
sends post-send master. Put another way, this shows the total signal going into
the FX processor regardless of the current channel being adjusted.
There are no reverb or delay sends from the reverb and delay returns, so when either
the reverb or delay is the current channel, there are no send faders shown as seen in the
image to the right.
FX Settings
—
The reverb and delay have multiple sliders which are used to alter the selected eff ect.
These sliders change dependent on which eff ect type is chosen for each channel. These sliders are global
and aff ect all channels sent to the eff ects as there is only one reverb and one delay on the DL1608.
The various FX controls for each FX type are described in more detail in a few pages.
EFFECT TYPE FX SENDS
FX SETTINGS
FX RETURNS
SENDS
REV
DLY
