Mackie DL1608 Reference Guide V1.2
38
An open gray box with only the channel’s name works, but let’s spice it up with an image.
There are several options in this department. From the channel popover, tap “Image” to reveal
a new popover as seen below [Image Source]. You will be presented with four choices:
Use Camera
—
If you’re familiar with how the camera on the iPad works, then you’re in luck...this one works
the exact same way! The encircled camera icon in the middle of the gray bar snaps the picture and the icon
in the upper-right corner selects between the front and back camera on the iPad. [Camera is unavailable on
the fi rst generation iPad].
Select Photo
—
Here you may select from all the photos that currently reside on your iPad.
Select Icon
—
Or select from a multitude of built-in icons at your disposal.
Clear Image
—
Believe it or not, tapping here will clear the image for that channel.
Since we already named channel 1 the kick drum, we might as well go with the
kick drum icon to boot, right? Tap the kick drum icon in the upper-left corner.
Channel 1 is set: name and image.
As seen in all of these images, a small number resides In the upper-left corner
regardless of name and/or image. This number represents each channel and
it cannot be changed or removed. Trust us, it’s for the best, as it is for easy
identifi cation of each mic pre.
Images are current state only. They are not recalled with snapshots or shows.
However, they may be stored and recalled with channel presets. Read more
about this in “Chapter 14: Mixer View : Navigation Bar”, starting on page 74.
Image Source
Select Icon
Select Photo
Use Camera
