manualshive.com logo in svg

Mackie 8-BUS Series, Owner'S Manual

Introducing the Mackie 8-BUS Series, a true powerhouse for audio enthusiasts. Unlock the full potential of your equipment with the comprehensive Owner's Manual, available for free download at manualshive.com. This essential manual provides detailed instructions, insider tips, and expert advice to maximize your audio experience. Don't miss out on this invaluable resource!

Share
Download
background image

D i g i t a l  8 • B u s

Table of Contents

T-4

Chapter 6 continued

Using External Processing ................................................. 6-62

Configuring an Aux Send .............................................. 6-63
Adjusting for Nominal Input and Output Levels ........... 6-64

Adding Final Mix Effects to the Main Outputs ................... 6-64

Live Mixing ..................................................................................... 6-64

Setup ......................................................................................... 6-64
Adjusting Input Signals ............................................................. 6-65
Routing Channels to Mains and Subs ........................................ 6-66

Assigning Channels to the L-R bus .................................... 6-66
Assigning Channels to BUS 1–8 ......................................... 6-67

Setup of Monitor Mixes for Performers ..................................... 6-68

Setting the Aux Send Levels .............................................. 6-68

Headphones ............................................................................... 6-69
Adding EQ, Dynamics and Effects to Input Signals ................... 6-69

Adding EQ .......................................................................... 6-69
Adding Compression ........................................................... 6-70
Adding Gate ....................................................................... 6-71
Adding Effects .................................................................... 6-71

Adding Effects to the Main Outputs .......................................... 6-73
Making a Recording While Doing a Live Mix ............................ 6-73

Using the Stereo AUXes ..................................................... 6-73

Recalling Console Snapshots During a Performance ................. 6-74

Hookup Diagrams

Analog Recording/Tracking ....................................................... 6-75
Digital Recording/Tracking ........................................................ 6-76
Analog Recording/Mixdown ...................................................... 6-77
Analog Recording/Overdub ........................................................ 6-78
Live Sound Reinforcement ......................................................... 6-79
Post Production ......................................................................... 6-80

7. Automation

Dynamic Automation ........................................................................ 7-1

Bypass ......................................................................................... 7-1
Absolute Mode ............................................................................. 7-1
Auto Touch Mode ......................................................................... 7-1
Trim Levels Mode ........................................................................ 7-2

Faders in Trim Mode ............................................................ 7-2

Auto Touch / Trim Levels Mode ................................................... 7-2

Snapshot Automation ....................................................................... 7-2
Automation Filters ............................................................................ 7-3

Faders .......................................................................................... 7-3
Mutes ........................................................................................... 7-3
Pan .............................................................................................. 7-3
All ................................................................................................ 7-3
Write Standby and Master Record ............................................... 7-4

Fader Motors Off .............................................................................. 7-4
Writing Fader Moves ........................................................................ 7-5
Writing Fader Moves in Trim Levels Mode ....................................... 7-6
Writing Mutes ................................................................................... 7-7
Writing Channel V-Pot Moves ........................................................... 7-8
Writing Bus Assignments ............................................................... 7-10
Writing Snapshots into Automation ................................................ 7-11
Undo Edit ........................................................................................ 7-12
Looping ........................................................................................... 7-13

Summary of Contents for 8-BUS Series
























































































































































































































































Reviews:

No comments

Related manuals for 8-BUS Series

Hamilton Beach M40 Series Manual preview
M40 Series
Brand: Hamilton Beach Pages: 32
Yamaha MG206C Manual De Instrucciones preview
MG206C
Brand: Yamaha Pages: 29
Yamaha PM5D Supplementary Manual preview
PM5D
Brand: Yamaha Pages: 2
Yamaha M7CL StageMix V1.5 Supplementary Manual preview
M7CL StageMix V1.5
Brand: Yamaha Pages: 4
Yamaha RM1x Data List preview
RM1x
Brand: Yamaha Pages: 24
Yamaha LS9 Editor Supplementary Manual preview
LS9 Editor
Brand: Yamaha Pages: 4
STS M2-H Operator'S Manual preview
M2-H
Brand: STS Pages: 71
HAI Omni 33A00-1 Quick Reference Manual preview
Omni 33A00-1
Brand: HAI Pages: 1
Kambrook KHM655 Instruction Booklet preview
KHM655
Brand: Kambrook Pages: 16
TREVIDEA G10087 User Manual preview
G10087
Brand: TREVIDEA Pages: 12
Avid Technology VENUE E6L Rework Instructions preview
VENUE E6L
Brand: Avid Technology Pages: 10
Wolfgang Puck BKMT0020 Use And Care Manual preview
BKMT0020
Brand: Wolfgang Puck Pages: 16
Meyer F585 2018 Owner'S/Operator'S Manual preview
F585 2018
Brand: Meyer Pages: 92
Meicheng CMX-12 Operation Manual preview
CMX-12
Brand: Meicheng Pages: 28
Crate Pro Audio PCM Plus Series Owner'S Manual preview
PCM Plus Series
Brand: Crate Pro Audio Pages: 12
Saramonic SmartMixer User Manual preview
SmartMixer
Brand: Saramonic Pages: 2
Rapid7 Nexpose Appliance Manual preview
Nexpose
Brand: Rapid7 Pages: 8
Oster 2498 User Manual preview
2498
Brand: Oster Pages: 12

Brands by name

Popular brands

Load more brands