Mackie 8-BUS Series, Owner'S Manual

Page: 127 / 247

6-50
D i g i t a l 8 • B u s
Starting a New Session
TO LOAD A GATE PATCH
From the console:
1. With GATE selected for channel pro-
cessing, press the SELECT button on
the channel you want to load with the
Gate file. Press and hold the SHIFT
button in the Master V-Pot Section to
select more than one channel.
2. Press MEMORY A or MEMORY B to
choose the memory location to which
you want to load the file.
3. Press LOAD PATCH in the Fat Chan-
nel Section.
4. The Fat Channel display shows the
first Gate file (in alphabetical order) in
the Gate folder. Press the SELECT
buttons below the arrows to scroll
through the stored Gate files.
5. When the one you want appears in the
display, press the SELECT button be-
low “Load” to complete the operation.
TO LOAD A GATE PATCH
From the screen:
1. Click on the SELECT button of the
channel you want to load with the
Gate file. Press and hold the SHIFT
key to select more than one channel.
2. Click on MEM A or MEM B to choose
the memory location to which you
want to load the file.
3. Click and hold on the MENU button in
the GATE control panel.
4. Drag down to “Open Gate.” The “Gate
Files...” dialog box appears.
5. Click on INTERNAL if the file is on
the internal hard drive, or FLOPPY if
the file is on a floppy disk.
6. Click on the name of the file to high-
light the one you want to load.
7. Click on “Open” to load the Gate file to
the selected channel(s).
ON
LOW PREVIOUS
SELECT
LOW MID HI MID
EQ COMPRESSOR GATE PLUG-INS LOAD PATCH SAVE PATCH
SETUP MEMORY A MEMORY B
HI NEXT
SELECT SELECT SELECT HELP
SUPER CD ENCODING
56 INPUT / 72 CHANNEL DIGITAL MIXER
D8B
g a t e # 1 ( L O A D G a t e )
< < S c a n > > C a n c e l O K