![background image](http://html1.mh-extra.com/html/macdon/r113-sp/r113-sp_operators-manual_3435729179.webp)
215009
165
Revision A
4.9.2
Removing Cutterbar Door Curtains
The procedure for removing cutterbar door curtains is the same for both doors.
1021476
A
Figure 4.129: R113 SP
1.
Open cutterbar doors (A). For instructions, refer to
.
1020974
A
B
C
Figure 4.130: Cutterbar Door
2.
Remove seven nuts (A) from the bolt studs.
3.
Remove aluminum liner (B).
4.
Remove curtain (C).
4.9.3
Installing Cutterbar Door Curtains
The procedure for installing cutterbar door curtains is the same for both doors.
1020948
A
B
C
D
E
Figure 4.131: Cutterbar Curtain
1.
Insert seven cutterbar door stud bolts (B) into the precut
holes on curtain (A).
2.
Install seven large washers (C).
3.
Install liner panel (D) against washers.
4.
Install seven nuts (E) onto bolt studs and torque to 28 Nm
(21 lbf·ft).
IMPORTANT:
To avoid damaging bolt studs, do
NOT
overtighten the nuts.
5.
Close cutterbar doors. For instructions, refer to
Summary of Contents for R113 SP
