MacDon R113 SP, Operator'S Manual

Page: 47 / 240

215009
33
Revision A
1008942
A
Figure 3.27: Ground Speed Lever
5. Press REEL UP switch (A) on the GSL to raise the center-link
until the hook is above the attachment pin on the header.
IMPORTANT:
If the center-link is too low, it may contact the header as
the windrower approaches the header for hookup.
1000780
B
A
Figure 3.28: Header Support
6. Slowly drive the windrower forward until the windrower
feet (A) enter header supports (B). Continue driving slowly
forward until the feet engage the supports and the header
nudges forward.
1008944
A
B
C
D
Figure 3.29: Ground Speed Lever
7. Use the following GSL functions to position the center-link
hook above the header attachment pin:
•
REEL UP (A) to raise the center-link
•
REEL DOWN (B) to lower the center-link
•
HEADER TILT UP (C) to retract the center-link
•
HEADER TILT DOWN (D) to extend the center-link
OPERATION