215009
70
Revision A
3.8.4
Ground Speed
Choose a ground speed that allows the cutterbar to cut the crop smoothly and evenly. Try different combinations of disc
speed and ground speed to suit your specific crop. Refer to your windrower operator
’
s manual for instructions on changing
ground speed.
CAUTION
Reduce speed when turning, crossing slopes, or traveling over rough ground.
In tough cutting conditions (such as native grasses), set the disc speed to MAXIMUM.
In light crops, reduce the disc header
’
s disc speed while maintaining ground speed.
NOTE:
Operating the disc header at the minimum disc speed will extend the wear life of cutting components.
The example shown in Figure
illustrates the relationship between ground speed and cut area for an R113
disc header. The chart demonstrates that a ground speed of 21 km/h (13 mph) would produce a cut area of approximately
8 hectares (20 acres) per hour.
Figure 3.105: Ground Speed for R113 SP Disc Header
0
A - Acres/Hour
B - Hectares/Hour
C - Kilometers/Hour
D - Miles/Hour
Summary of Contents for R113 SP
