215009
152
Revision A
1023094
A
Figure 4.107: Safecut Spindle-Nut Wrench Location
9.
Remove the M12 bolt and remove safecut spindle-nut
wrench (A) from its storage location.
1019153
A
B
C
Figure 4.108: Cutterbar Spindles
IMPORTANT:
•
Spindles that rotate clockwise have right-leading
threading and a smooth top on the spindle gear
shaft (A).
•
Spindles that rotate counterclockwise have left-leading
threading and machined grooves on the spindle gear
shaft (B) and nut (C).
•
If the spindle position in the cutterbar has changed, the
rotational direction of that spindle
MUST
remain the
same (that is, a clockwise spindle must maintain its
clockwise rotation). Failure to maintain rotation pattern
can result in damage to spindle and/or cutterbar
components.
1026444
A
Figure 4.109: Cutterbar Spindle
10. Remove two M10 bolts and washers (A).
Summary of Contents for R113 SP
