MacDon R113 SP, Operator'S Manual

Page: 192 / 240

215009
178
Revision A
WARNING
To prevent frame from slipping off forks, ensure frame is secured to forks. Failure to do so could result in death or
serious injury.
5. Support and secure the adapter frame for lifting using one of the two methods below:
1024842
A
B
Figure 4.159: Supporting Frame Using Straps
Method 1:
a. Attach straps (A) to adapter frame (B) and the forklift
forks. Use straps with a minimum working load of
454 kg (1000 lb.).
10248431024843
A
A
B
C
C
1024843
A
A
B
C
C
Figure 4.160: Supporting Frame Using Chain
Method 2:
a. To protect the finish on the frame, wrap packing
foam (A) (or equivalent) around the frame at
approximately the locations shown.
b. Position forks (B) under the packing foam on the frame
as shown at right. Raise forks and lift the frame slightly.
The forks should
NOT directly contact the frame.
c. To secure the frame to the forks, wrap chain (C)
around the end of the forks and attach the other end
to the forklift.
1029832
A
Figure 4.161: Header on Blocks
6. Lift the header with the forklift and place 150 mm (6 in.)
wooden blocks (A) under the skid shoes. Lower the header
onto the blocks and allow the header to tilt forward.
MAINTENANCE AND SERVICING