215009
124
Revision A
Installing Discblades
CAUTION
Discblades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves when working
with blades.
IMPORTANT:
If you are unsure which direction the spindles rotate, refer to
3.9 Reconfiguring Cutterbar Crop Stream, page 71
.
1004029
D
B
A
C
Figure 4.51: Discblade
1.
Place a pin (or equivalent) in the front hole of the rock
guard to prevent disc rotation while tightening blade bolts.
2.
Install new or reversed blade (A) with shoulder bolt (B)
onto disc (C).
IMPORTANT:
Nuts are one-time-use only. When flipping or changing a
blade, replace using a
NEW
nut only.
3.
Install new nut (D) and torque to 125 Nm (92 lbf·ft).
WARNING
Ensure the cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or
machine damage.
1021489
A
Figure 4.52: Cutterbar Doors
4.
Close cutterbar doors (A). For instructions, refer to
Summary of Contents for R113 SP
