215009
128
Revision A
1004047
A
C
B
Figure 4.59: Accelerator Install
3.
Install new nut (A), flange bolt (B), and discblade (C)
onto disc.
1014626
A
B
Figure 4.60: Accelerator Install
4.
Torque the inside nut (A) to 58 Nm (43 lbf·ft).
5.
Torque the outside nut (B) (closest to the blade) to 125 Nm
(92 lbf·ft).
6.
Repeat the installation procedure for the second
accelerator.
WARNING
Ensure the cutterbar is completely clear of foreign objects.
Foreign objects can be ejected with considerable force when
the machine is started and may result in serious injury or
machine damage.
7.
Remove the wooden block.
1021489
A
Figure 4.61: Cutterbar Doors
8.
Close cutterbar doors (A). For instructions, refer to
Summary of Contents for R113 SP
