MacDon R113 SP, Operator'S Manual

Page: 196 / 240

215009
182
Revision A
1024878
A
B
Figure 4.171: Conditioner Gearbox
5. Align the holes in support (B) with the mounting holes in
the header frame and install two carriage bolts (A) to
secure conditioner gearbox support (B) to the header. Bolt
heads face inboard. Torque nuts to 69 Nm (51 lbf·ft).
1023363
A
Figure 4.172: Left Side of Conditioner
–
Right Side Similar
6. Torque nuts (A) to 170 Nm (126 lbf
∙
ft).
7. Remove the lifting chains from the conditioner and move
the lifting device clear of the work area.
8. If necessary, install conditioner drive components. For
instructions, refer to
Installing Conditioner Drive, page 185 .
WARNING
To prevent frame from slipping off forks, ensure frame is
secured to forks. Failure to do so could result in death or
serious injury.
9. Support and secure the adapter frame for lifting using one of the two methods below:
1024842
A
B
Figure 4.173: Supporting Frame Using Straps
Method 1:
a. Attach straps (A) to adapter frame (B) and the forklift
forks. Use straps rated for overhead lifting with a
minimum working load of 454 kg (1000 lb.).
b. Pick up the frame and position it against the header.
MAINTENANCE AND SERVICING