215009
83
Revision A
Positioning Rear Baffle Deflector Fins
The additional rear baffle deflector fins are stored on top of the baffle, but can be moved under the baffle when a
narrower windrow is desired.
To install fins, follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key from ignition
before leaving operator's seat for any reason.
1023132
A
B
Figure 3.122: Deflector Fins in Storage Position
1.
Remove the two deflector fins (A) from rear baffle (B).
1023133
A
B
Figure 3.123: Left Deflector Fins in Field Position
under Baffle
2.
Position deflector fin (A) under the baffle and secure with
existing bolt and nut (B). Install bolt with bolt head facing
down. Adjust to approximately 60° as shown, and torque
nut to 69 Nm (51 lbf·ft).
3.
Repeat for the opposite deflector fin.
NOTE:
Adjusting the angle of the fins can be useful to spread crop
within the desired windrow width.
Summary of Contents for R113 SP
