MacDon HC10, Original Instruction

Page: 6 / 242

Section Summary of Change Internal Use
Only
•
Step 7, page 18
3.3 Installing the Rock Grate, page 18
•
Step 8, page 18
Revised step to say
“
tighten nuts
”
instead of
“
tighten
bolts.
”
Tech Pubs
3.4 Installing Deck Brackets, page 19 Created introductory topic because of the introduction of
adapter plate MD #159734.
ECN 58813
3.4.1 Installing Deck Brackets
–
D115,
D120, and D125, page 19
Created a new topic for D115, D120, and D125 headers to
include the introduction of adapter plate MD #159734.
Added part numbers and detailed descriptions of parts to
all steps where shown. ECN 58813
3.4.2 Installing Deck Brackets
–
D60, D65,
and D130, page 22
Created topic for D60, D65, and D130 headers to exclude
the introduction of adapter plate MD #159734.
Added part numbers and detailed descriptions of parts to
all steps where shown.
ECN 58813
3.4.2 Installing Deck Brackets
–
D60, D65,
and D130, page 22
•
Step 9, page 23
Revised step to say
“
tighten nuts
”
instead of
“
tighten
bolts.
”
Tech Pubs
3.5 Installing the Feed Deck, page 24
•
Step 1, page 24
Revised step to include instructions for retrieving parts. Tech Pubs
3.5 Installing the Feed Deck, page 24
•
Step 4, page 24
•
Step 5, page 25
•
Revised steps and associated illustrations to correct
the installation location of the bolt and nut.
•
Revised step to include more detailed part
descriptions and/or instructions for retrieving parts.
Tech Pubs
3.5 Installing the Feed Deck, page 24
•
Step 6, page 25
Revised step to include more detailed part descriptions
and/or instructions for retrieving parts. Tech Pubs
3.6.1 Installing Conditioner
–
Lifting
Method, page 26
Removed the following DANGER ONLY because the
machine is considered to be off at this time.
•
To avoid bodily injury or death from unexpected start-
up or fall of a raised machine, always stop engine and
remove key before leaving the operator
’
s seat, and
always engage safety props before going under the
machine for any reason.
Tech Pubs
3.6.1 Installing Conditioner
–
Lifting
Method, page 26
•
Step 7, page 27
Revised step as follows:
•
Now includes the nut.
•
Added detailed part descriptions and/or instructions
for retrieving parts.
Tech Pubs
3.6.1 Installing Conditioner
–
Lifting
Method, page 26
•
Step 8, page 27
Revised step as follows:
•
Revised the illustration to correct the installation
location of the bolt and nut.
•
Added detailed part descriptions and/or instructions
for retrieving parts.
Tech Pubs
215126
iv
Revision A