MacDon HC10, Original Instruction

Page: 59 / 242

215126
37
Revision A
1005099
A
B
E
D
C
F
G
Figure 3.51: Hydraulic Coupler Components
–
D Series
Shown, D1 Series Similar
A - Check Valve Tee B - Side Draper Motor Return
C - Feed Draper Return D - Conditioner Return
E - Header Return Tee F - Knife Drive Hose
G - Conditioner Drive
6. Install check valve tee (A) on main return tee (E).
NOTE:
Arrow on check valve tee fitting should face up.
7. Connect feed draper return hose (C) with the blue tie to
check valve tee (A).
8. Reinstall the side draper return hose (B) that was removed
in Step
2, page 36 , to the new check valve tee (A).
9. Connect conditioner return hose (D) with union to knife
drive hose (F) removed in Step
5, page 36 .
10. Connect conditioner drive hose (G) with orange tie to the
coupler where knife drive hose was removed in Step 5,
page 36 .
11. Bundle the hoses with cable ties as required. Ensure hoses
do NOT contact sharp edges.
12. Reinstall the hose cover.
1007063
C
A
B
Figure 3.52: Feed Draper Return Hydraulics
–
Shields Removed to Expose the Feed Draper Return Hose Connection
A - Check Valve Tee B - Pressure Reducing Valve C - Feed Draper Return Hose
UNLOADING AND ASSEMBLY